Installation Instructions:

1.  Download the file "Wind05Setup.exe"
2.  Run "Wind05Setup.exe".  The program will install in its own directory - it can be run "side by side" with 
    previous versions.


*************************  Version 7.6 (June 30, 2009) ***************************
1.  Automatically compute the 'a' dimension for free standing roofs C&C - Figure 6-19


*************************  Version 7.5 (July 24, 2008) ***************************
1.  Updated equation labels for Gust Factors when using Complete Analysis
2.  Set a default figure to the Open Buildings System Type


*************************  Version 7.4 (May 22, 2008) ***************************
1.  The Solid Signs report would not run for certain inputted values.


*************************  Version 7.3 (May 8, 2008) ***************************
1.  The Property input for Figure 6-19 would occasionally revert to default values.


*************************  Version 7.2 (May 1, 2008) ***************************
1.  User defined height intervals were getting reset when the Cancel button was pressed.


*************************  Version 7.1 (April 16, 2008) ***************************
1.  Added missing pressure coefficients for Figure 6-14, Zones 2' and 3' for roof angles between 3 and 10 degrees.
2.  Corrected pressure coefficients for Figure 6-14, when roof angle was less than or equal to 3 degrees.


*************************  Version 7.0 (March 2008) ***************************
1. New version updated to ASCE 7-05.



********************ATTENTION!**************************************************

This is the latest installation for the program, however additional updates or 'patches' may be available from:

ftp://ftp.digitalcanal.com/Structural/Patches/