Installation Instructions:

1.  Download the file "Wind98Setup.exe"
2.  Run "Wind98Setup.exe"


*****************************  Version 5.8 (July 2007) *****************************
1. Vista-ready.


***********************************  Version 5.7 ***********************************
1. Program was not interpolating the values for Figure 6-5 correctly.

***********************************  Version 5.6 ***********************************
1. Monoslope Roofs over Open Buildings was getting a divided by 0 error when the 
   roof angle is equal to 30.

***********************************  Version 5.5 ***********************************
1. Missing gust factor for roof overhangs, reference 6-4 

***********************************  Version 5.4 ***********************************
1. #Ref error in Figures 6-18, Figure 6-20, Figure 6-3

***********************************  Version 5.3 ***********************************
1. In the analytical method for components and cladding on a building taller than 
   60'.  On the last page of the output, "Design Windward Wall Wind Pressures, p, 
   Equation 6-23 for Zone 5,labels "p-" and "p+" in the last two columns are 
   reversed.  

***********************************  Version 5.2 ***********************************
1. The topographical factor K1 was using a value of .55 for exposure B.  It 
   should’ve been using .95.


********************ATTENTION!**************************************************

This is the latest installation for the program, however additional updates or 'patches' may be available from:

ftp://ftp.digitalcanal.com/Structural/Patches/